Micronet-technology Network Device RAIDBank4 Manuel d'utilisateur télécharger pdf (Page 54)

RAIDBank4 Owner’s Manual

Appendix C- Terminal Session Setup

The RAIDBank4 has provisions for an RS232 host management connection. In order to use

the RS232, a special cable has to be used (not included)- consult your authorized Micronet

reseller for more information. The communications port configuration defaults are 115200

Baud, 1 Stop bit operation, no handshaking and no parity. For changing these settings,

please see section 5 of chapters 3 or 4.

Serial host management requires a VT100 compatible terminal, or a PC operating in an

equivalent terminal emulation mode. All RAIDBank4 monitoring, configuration and adminis-

tration functions can be exercised from the terminal session.

There are a wide variety of Terminal Emulation packages, but for the most part they should

be very similar. The following setup procedure is a sample VT100 Terminal session utilizing

Hyper Terminal use Version 3.0 or higher.

Step 1: Most versions of Windows include HyperTerminal, Typically located in Start menu ->

Programs -> Accessories -> Communications -> Hyper Terminal. Please see your Microsoft

Windows™ Documentation for more information about HyperTerminal.

Step 2: Open HYPERTRM.EXE.

Step 3: Enter a name for your Terminal Session and Click OK.

C-Terminal Session Setup

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 65 66

Pas de commentaire

Micronet-technology Network Device RAIDBank4 Manuel d'utilisateur Page 54